Lawn tractor .XDC150 HD ST400 414CC 84CM CastelGarden Stiga

Petrol lawn tractor with STIGA engine of 414 cc, cutting deck of 84 cm with two blades and a 240 L rear collector.

• STIGA engine with a net power of 6.3 kW at 2400 rpm.
• Pedal hydrostatic transmission
• 84 cm cutting deck with anti-scalp wheels
• 240 L grass collector
• Headlights and front bumper
• Battery charger sold separately

The Castelgarden XDC 150 HD is a lawn tractor powered by a single-cylinder engine with a net power of 6.3 kW at 2400 rpm. The mower features a pedal hydrostatic transmission that allows for constant speed control without changing gears. The 84 cm cutting deck has two blades and 7 cutting height settings from 25 to 80 mm with an electromagnetic clutch for blade engagement. The XDC 150 HD has a 240-liter rear grass collector, an ergonomic seat design, dashboard, and LED headlights. Battery charger and towing hitch included. This mower can be set for mulching the cut grass using the included mulching kit.

Technical specifications

Power

Fuel Gasoline

Battery capacity 18 Ah

Power 6.3 kW

Cutting area 3000 ㎡

Engine brand STIGA

Engine model ST 400 Powered by STIGA

Displacement 414 cm³

Engine RPM 2400 rpm

Battery voltage 12 V

Choke (air) Manual

Cooling system Air

Fuel tank capacity 6 l

Cutting system

Minimum uncut radius 80 cm

Cutting system Collection

Cutting width 84 cm

Reverse cutting Yes

Blade rotation Asynchronous

Cutting height adjustment Manual with levers

Cutting height positions 7 positions

Cutting heights 25 - 80 mm

Number of blades 2

Blade type Winged

Additional cutting system Rear Discharge, Mulching

Blade engagement type Electric

Drive system

Traction Rear traction

Transmission

Transmission method Pedal operated

Transmission Hydrostatic

Equipment

Collector bag emptying Manual

Collector bag capacity 240 l

Steering wheel Ergonomic Castelgarden

Seat type Classic Castelgarden

Seat adjustment Screws

Dashboard Yes with LED

Front wheel size 15x6.00-6

Rear wheel size 18x8.50-8

Hour meter No

Lights Conventional

Cruise control No

Bumper Yes

Water hose connection Yes

Collector bag model Fabric

Storage compartment Yes

Cup holder Yes

Pivoting front axle Yes

Anti-scalp wheels 2

Safety system Seat with safety switch

Kit / Tools

Mulching kit Included

Charger Optional

Towing kit Optional

Vibration and noise data

Guaranteed sound power level (LwA) dB(A) 100

Maximum seat vibrations (m/s2) 1.06

Maximum steering wheel vibrations (m/s2) 6.37

Measured sound power level (LwA) dB(A) 100

Sound pressure level at operator's ear (LpA) dB(A) 86

Overall dimensions

Package weight 225 kg

Product length 2338 mm

Product width 880 mm

Product height 1100 mm

Product weight 189 kg

Faqs

-What is the correct way to clean the lawn tractor after mowing?

The exterior of the lawn tractor should be cleaned with water and detergent, taking care not to let water enter the electrical system, engine, and electronic board located under the dashboard. The collector bag should be emptied and cleaned of debris, then reassembled so that the cutting unit can be washed, then removed, rinsed, and left to dry. When washing the cutting unit and the discharge chute, the collector bag or rear discharge shield must be mounted, the operator must be seated, the cutting unit must be in position “1”, the engine on, the transmission in neutral, and the cutting device must be connected. Then connect a water hose to the appropriate fittings and let the water run for a few minutes while keeping the cutting devices in motion.

-What action should be taken before winter storage or before storing it for more than 30 days?

After allowing the engine to cool and fully charging the battery, disconnect the battery cables and store it in a cool, dry place. Empty the fuel tank, thoroughly clean the lawn tractor, check the condition of the cutting device group, and if necessary, contact the service center. Then store the lawn mower with the cutting deck in the lowered position, in a sheltered environment, and if possible, covered with a tarp.

-What actions should be performed before initially using a lawn tractor that has been stored during the winter or for more than 30 days?

Refuel and check the oil level, air filter, and fuel filter. Ensure that the tires are properly inflated and then prepare the lawn tractor according to how you intend to mow (side discharge, collection, rear discharge, mulching). For more information on preliminary operations and safety checks, refer to the relevant sections of the instruction manual.

-What standard maintenance operations does the lawn mower need?

Before each use, it is recommended to perform safety checks and inspections, check tire pressure, and if necessary, refuel the fuel and oil tanks. After each use, ensure a general cleaning of the lawn mower. Refer to the dedicated section of the instruction manual (“maintenance table”) for the recommended regular actions to ensure optimal use of the machine.

-What are the cutting functions of the lawn mower?

The lawn mower can be set up in different cutting modes: rear bag collection or rear discharge, or mulching and shredding the grass using the specific “mulching kit” function. The mulching cutting system allows the grass to be cut into fine particles, which remain on the lawn, restoring nutrients and promoting growth.

-What type of parts and accessories can the tractor be equipped with?

The lawn mower can be equipped with various parts and accessories to enhance its functions and ensure maximum versatility throughout the year. For the complete list of parts and accessories, refer to the relevant product page on the website.